Is Autel IM508 ,IM608 ,IM 608 PRO all original or not

16 Dec 21 - 00:28

Of course, The Autel IM508 , IM608 , IM608 Pro are original .All of them are from Autel ,No one can clone Autel device .IM 508 is the startest version for key programming .The IM608 is the second ,and the IM608 Pro is the latest one .

IM608 PRO as latest one update ,that include function of the Autel Scanner IM508 ,IM608 ,even added more featurn they do not have .luckly ,if you have the IM508 and IM608 ,you just purchase the XP400 PRO ,then you can do same function with the IM 608 PRO....

How to Remove & Install Exhaust Manifold for ISUZU 4JJ1 Engine

16 Dec 21 - 00:22

This instruction show you guide on how to remove and install exhaust manifold for ISUZU Euro 4 N series truck 4JJ1 engine.If you want more about ISUZU truck cases,please refer to:ISUZU Trouble Repair.

Procedures:

Removal

1.Drain the engine coolant.

2.Remove the front exhaust pipe and exhaust brake.

3.Remove the generator.

4.Remove the turbocharger assembly.

5.Remove the EGR cooler.

6.Remove the exhaust manifold heat protector.

7.Remove the exhaust manifold and g...

BENZ DIAGNOSTIC TOOL COMPARISON

28 Oct 21 - 23:02

Do not know how to choose MB Star Diagnostic Tool? Here we have picked out 4 to make a comparison. Let’s find what are the differences between them.

Super MB Pro M6 vs. MB SD C4 Plus vs. SD Connect C4 vs. OEM MB C6

How to Sovle MB SD C5 battery too low

28 Oct 21 - 22:55

Problem:

I tried to update the mux but saying battery too low.

Solution:

Your MB Star C5 host needs to install a new battery before proceeding with the firmware upgrade. Please buy new battery: 6 units Ni-MH Rechargeable batteries, Size: AA, Voltage: 1.2V.

Please follow this article on how to install battery for C5:

https://blog.obd2.ltd/how-to-install-mb-sd-c4-rechargeable-batteries/

***For new sdconnec C4 Plus / MB SD C5 with DoIp, you can update the firmware without i...

BENZ C6 Xentry Diagnostic OEM Star C6 Support DoIP

05 Oct 21 - 23:06

Benz C6 is the new OEM xentry diagnostic vci multiplexer which can support DoIP while sd connect c4 can not. BENZ C6 xentry diagnostic vci comes with latest xentry software 2021.06v. Star c6 benz diagnostic tool can support both cars and trucks via obd.

HOW TO ACTIVATE LAUNCH X431 TRUCK MODULE TO YOUR ANDROLD TABLET OR PHONE

05 Oct 21 - 23:03

How to Activate Launch X431 Truck Module to Your Androld Tablet OR Phone

1. Note: if you are using android version higher than 7 (Nougat) Please download the file from this link: https://erwinsalarda.com/download-launch-x431-apk-software-for-android/
2. From the link above download the Launch X431 Pro3 SOFTWARE WITHOUT (S), NOT PRO3-S.
3. Before anything else, you must have a Launch X431 PRO3 account.

INSTRUCTION HOW TO ACTIVATE:

Warning: If your ISP is CONVERGE, You can’t Activate...

Launch X431 X-PROG vs. X-PROG3 Programmer

29 Sep 21 - 08:16

The optional Launch X431 “X-PROG” or “X-PROG3” is required for compatibility when the unit is related to the immobilizer. What’s the difference between XRPGOG and XPROG3?

Item	Launch X431 X-PROG	Launch X431 X-PROG3
Read/Write EEPROM	No	Yes
Read/Write MCU	No	Yes
Mercedes Benz Keys	No	Yes
Key simulator	No	Yes
VW 4th IMMO Dump Mode All Keys Lost	No	Yes
Read engin...

Xtool X100 Pro2 vs Xtool X100 Pro3

29 Sep 21 - 08:08

Both Xtool X100 Pro2 and Xtool X100 Pro3 are handheld scanner, they share the same OBDII scan and immobilizer key programming functions. Xtool X100 Pro3 has no odometer correction function and adds 5 special functions including Oil light reset, EPB (Electronic Parking Brake), Steering Angle Sensor (SAS) Service, TPS (Throttle Matching) and ABS Bleeding.

For language and update, there is no much difference.

...

	XTOOL X100 Pro2	Xtool X100 Pro3
Image

MB Star Diagnostic Xentry software common error and solution

08 Sep 21 - 01:51

MB Star Diagnostic Xentry software works fine with MB SD C4 (Plus) and MB SD C5. It supports Mercedes-Benz car & truck diagnostic till 2020.

The newest Xentry software has been updated to V06.2020. Here share some common errors which the customers gave feedback and offer the corresponding solutions by cardiagtool.co.uk engineer.

Error 1: Current MAC address (LAN ID): Unknown LAN ID

Error 2: Wi-Fi connection error

Error 3: Register/Configure (2138). The key is not divisible by 2 an...

Xhorse VVDI Key Tool Plus VS Zed-full

08 Sep 21 - 01:41

There is no slider selected or the slider was deleted.